The Ultimate HP HPE6-A72 Dumps PDF Review
Achieve The Utmost Performance In HPE6-A72 Exam Pass Guaranteed
HP HPE6-A72 certification exam covers various topics, including VLANs and trunks, spanning tree protocol, link aggregation, access control, and more. HPE6-A72 exam is designed to test the candidate's knowledge of Aruba switching technologies and their ability to troubleshoot and configure these technologies in a network environment. It is a comprehensive exam that requires the candidate to have a thorough understanding of the concepts and technologies covered.
To pass the HPE6-A72 Exam, candidates need to have a strong understanding of ArubaOS-Switches, including the configuration of VLANs, link aggregation, and spanning tree protocol. Candidates must also have a solid understanding of network protocols, including TCP/IP, DNS, DHCP, and SNMP. HPE6-A72 exam is 90 minutes long, and candidates must answer 60 questions. The passing score for the exam is 65%.
One of the benefits of obtaining the Aruba Certified Switching Associate certification is that it demonstrates to employers that the candidate has the necessary skills and knowledge to work with Aruba switching solutions. Aruba Certified Switching Associate Exam certification can help IT professionals advance their careers and open up new job opportunities.
NEW QUESTION # 52
Place the OSI Layers in the correct order. Arrange them from least to greatest, starting with Layer 1 on the top, and progressing to Layer 7 on the bottom.
Answer:
Explanation:
Explanation:
Graphical user interface, application Description automatically generated
NEW QUESTION # 53
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Using access control lists (ACLs) at the Core to improve performance
- B. Shifting endpoint access to the Aggregation layer from the Access layer
- C. Connecting WAN/MPLS and Data center access to the Aggregation layer
- D. Better Core router performance by offloading processing
Answer: D
NEW QUESTION # 54
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 1/4/15
- B. 8400(config)# interface 2/4/15
- C. 8400(config)# interface 2/3/17
- D. 8400(config)# interface 1/7/16
Answer: B
NEW QUESTION # 55
Match each description to the correct term.
Answer:
Explanation:
NEW QUESTION # 56
Refer to the exhibit.
What does the command page result in?
- A. Results in a page break to disable the default continuous scrolling In the console.
- B. Shows a new terminal window opening to allow typing while debugging occurs.
- C. Starts an automatic page scrolling effect that pauses for a few seconds every 30 rows.
- D. Enables a terminal notification when a new debug event occurs for L2MAC events.
Answer: D
NEW QUESTION # 57
Refer to the exhibit.
The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches.
What is the output of this command?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: A
NEW QUESTION # 58
You have completed a successful VSF stack between two switches.
Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: A
NEW QUESTION # 59
Review the exhibit.
Which ports should be configured as access ports? Click in the green box to make your selection. (Select two.)
Answer:
Explanation:
Explanation:
A diagram of a computer network Description automatically generated
NEW QUESTION # 60
Which option correctly describes a two-tier network design?
- A. divides the Core into two layers (Core and Aggregation) with the Access Layer only handling PoE and Access Control
- B. designed to avoid routing entirely and to have Layer 2 remain across Core, Distribution, and Access layers
- C. includes a Distribution Layer to provide Layer 3 features between a routed Core and a Layer 2 Access edge
- D. divides the network into two layers (Access and Core) with the option of routing to the Access Layer
Answer: C
Explanation:
In a two-tier network architecture, the collapsed core layer typically combines the core and distribution layers of a three-tier architecture into a single layer. The main function of the collapsed core layer is to provide high-speed switching and routing of traffic between the distribution layer switches and the access layer switches.
NEW QUESTION # 61
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
- B. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- C. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
- D. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
Answer: B
NEW QUESTION # 62
Refer to the exhibit.
What configuration is needed in order for "show LLDP configuration" to show this output?
- A. configuring LLDP both globally and on the interfaces
- B. enabling LLDP on the interfaces only
- C. none; LLDP is enabled by default on Aruba switches
- D. configuring LLDP globally only
Answer: C
NEW QUESTION # 63
Refer to the exhibit
Which command on Access-2 port 1/1/4 will enable connectivity between PC-1 and Server-1 without any routing enabled in the network?
- A. Access-2 (config-if-1/1/4)# vlan trunk allow 1, 10, 255
- B. Access-2 (config-if-1/1/4)# vlan access 1, 10, 20, 255
- C. Access-2 (config-if-1/1/4)# vlan 20 untag 1/1/4
- D. Access-2 (config-if-1/1/4)# vlan access 20
Answer: D
NEW QUESTION # 64
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION # 65
Refer to the exhibit.
Switch-1 is not the root bridge. The ports shown are all the connected pointtopoint interfaces. What Role (hidden by the blue rectangle) will be assigned to the Lag 1 interface?
- A. Backup
- B. Root
- C. Designated
- D. Alternate
Answer: B
NEW QUESTION # 66
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. tracert
- B. ping
- C. netstatus
- D. traceroute
- E. pathping
Answer: B,D
NEW QUESTION # 67
Refer to the exhibit.
Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?
- A. 0
- B. 1
- C. 2
- D. 01001011
Answer: C
NEW QUESTION # 68
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION # 69
Refer to the exhibits.
The AOS-CX 6300M switch is attempting to configure VSF with a peer CX 6300F switch. What is one reason you are receiving the above error when attempting to configure VSF on the AOS-CX 6300M switch?
- A. VSF Is not possible between CX 6300M and CX 6300F AOS-CX switches.
- B. The port1/1/21 has been shutdown
- C. AOS-CX VSF links can only be applied to uplink ports with 10G, 25G. and 50G speeds.
- D. Link 1 cannot be used if the attached CX 6300F VSF member 2 has already assigned link 1
Answer: D
NEW QUESTION # 70
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?
- A. The command page
- B. The command more
- C. The command less
- D. The command terminal length 30
Answer: A
NEW QUESTION # 71
Which switches support Aruba Virtual Switching Extension (VSX)? (Choose two.)
- A. Aruba 6405
- B. Aruba 5406R
- C. Aruba 8350
- D. Aruba 8400
- E. Aruba 2930F
Answer: A,D
NEW QUESTION # 72
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
- A. "password"
- B. No password is set for this account.
- C. The same login password that has lost originally.
- D. "forgetme!"
Answer: D
NEW QUESTION # 73
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION # 74
Refer to the exhibit.
What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?
- A. Change the Core-1 management address to 10.1.1.1/25 first
- B. Use the command ping 10.1.1.254 vrf mgmt
- C. The destination 10.1.1.254 requires configuring a static route
- D. Use the command ping 10.1.1.254/24
Answer: B
NEW QUESTION # 75
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: D
Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
NEW QUESTION # 76
......
Achive your Success with Latest HP HPE6-A72 Exam: https://pass4sure.prep4cram.com/HPE6-A72-exam-cram.html
