The Best Citrix 1Y0-241 Study Guides and Dumps of 2022 [Q21-Q39]

Share

The Best Citrix 1Y0-241 Study Guides and Dumps of 2022

Top Citrix 1Y0-241 Exam Audio Study Guide! Practice Questions Edition


Who should take the Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management Exam

The Citrix ADC 13 Essentials and Traffic Management exam certification is an internationally-recognized validation that identifies persons who earn it as possessing skilled as Network Administrators, Network Engineers, and Citrix Administrators. If a candidate wants significant improvement in career growth needs enhanced knowledge, skills, and talents. The Citrix ADC 13 Essentials and Traffic Management exam certification provide proof of this advanced knowledge and skill. If a candidate knows associated technologies and skills that are required to pass the Citrix ADC 13 Essentials and Traffic Management exam then he should take this exam.

The 1Y0-241 exam was developed to measure the minimum knowledge and skills required to implement Citrix ADC 13 solutions. Passing this exam means a candidate demonstrated the minimum required knowledge and skills required of Citrix networking professionals who can install, configure and/or operate Citrix ADC 13 in enterprise environments. The tasks tested in this exam will represent those skills, which are deemed most important, based on high criticality ratings, to perform the job of networking and traffic optimization with Citrix ADC. Primary Audience:

  • Cloud Administrators/Engineers
  • Network Administrators
  • Systems Engineers /Systems Administrators
  • Network Engineers
  • Citrix Administrators

Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management Exam Certification Path

The Citrix ADC 12 Essentials and Traffic Management exam certification include only one 1Y0-241 certification exam. Preparation for any certification could be challenging if the candidate has not done the proper planning and haven't used relevant study material source. On the internet candidate would be finding lots of ebook or material to study but the problem which one they should refer to and how to identify which one is genuine. To overcome this challenging phase, Prep4cram came with their study plan covering course contents specific to Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management exam in the form of Citrix 1Y0-241 practice exams and Citrix 1Y0-241 exam dumps.

 

NEW QUESTION 21
Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.
Which feature should the administrator configure to accomplish this?

  • A. DNS Preferred Location
  • B. DNS Record
  • C. DNS Proxy
  • D. DNS View

Answer: D

 

NEW QUESTION 22
A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of 1,000 per second.
Which command does the administrator need to run to correctly configure this policy?

  • A. SYS.CHECK.LIMIT(<limit_identifier>)
  • B. SYS.CHECK.LIMIT(<limit_identifier>) || HTTP.REQ.LIMIT(<limit_identifier>)
  • C. SYS.CHECK.LIMIT(<limit_identifier>) || CONNECTION.IP.LIMIT(<limit_identifier>)
  • D. HTTP.REQ.LIMIT(<limit_identifier>)

Answer: A

 

NEW QUESTION 23
What
is the effect of the "set cs vServer-CS-1 -redirectURL http://www.newdomain.com/mysite/" command?

  • A. All
    the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
  • B. If
    the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain
    .com/mysite/.
  • C. If
    the vServer-CS-1 encounters a high connection rate, then users will be redirected to
    http://www.newdomain.com/mysite/.
  • D. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.

Answer: B

 

NEW QUESTION 24
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?

  • A. Configure LACP on the SDX for the data interface.
  • B. Add a second interface to each Citrix ADC VPX instance.
  • C. Configure LACP on the SDX for management interface.
  • D. Configure a failover interface set on each Citrix ADC VPX instance.

Answer: A

 

NEW QUESTION 25
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?

  • A. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto
    "https://server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
  • B. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
    "https://vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
  • C. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
    "https://vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
  • D. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto
    "https://server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"

Answer: D

 

NEW QUESTION 26
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?

  • A. Citrix ADC VPX
  • B. Citrix ADC SDX
  • C. Citrix ADC MPX
  • D. Citrix ADC CPX

Answer: D

 

NEW QUESTION 27
A Citrix Administrator is creating a new SSL vServer and notices the ns_default_ssl_profile frontend SSL profile is automatically bound to the SSL vServer.
Which two actions can the administrator perform to change or remove the ns_default_ssl_profile_frontend SSL profile once it is enabled? (Choose two.)

  • A. Globally disable the ns_default_ssl_profile_frontend SSL profile.
  • B. Unbind the ns_default_ssl_profile_frontend SSL profile from the SSL vServer without binding a replacement SSL profile.
  • C. Globally unbind the ns_default_ssl_profile_frontend SSL.
  • D. Create a separate SSL profile.
  • E. Unbind the default SSL profile and bind the newly created SSL profile.

Answer: A,E

 

NEW QUESTION 28
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?

  • A. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
    "https://vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
  • B. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
    "https://vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
  • C. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
  • D. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"

Answer: D

 

NEW QUESTION 29
Scenario: A Citrix Administrator downloaded and deployed Citrix Application Delivery Management (ADM) in an environment consisting of six Citrix ADCs and 100 virtual servers. When viewing the Citrix ADM console, the administrator sees only 30 virtual servers.
Why is the administrator unable to see all 100 virtual servers?

  • A. Additional Citrix ADM systems need to be deployed to see all virtual servers.
  • B. The nsroot passwords are NOT the same across all the Citrix ADCs.
  • C. The Citrix ADC and Citrix ADM firmware versions are NOT the same.
  • D. Citrix ADM is using a free license.

Answer: A

 

NEW QUESTION 30
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)

  • A. Configure a CS vServer of target type GSLB.
  • B. Configure CS policies that designate a load-balancing vServer as the target vServer.
  • C. Bind the GSLB domain to the GSLB vServer.
  • D. Bind the domain to the CS vServer instead of the GSLB vServer.

Answer: A,B

Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/global-server-load-balancing/how-to/ configure-gslb-content-switch.html

 

NEW QUESTION 31
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?

  • A. Add two more 10G Citrix ADC ports to the network and configure VLAN.
  • B. Purchase another Citrix ADC MPX appliance.
  • C. Plug another 10G Citrix ADC port into the router.
  • D. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).

Answer: D

 

NEW QUESTION 32
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith "DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?

  • A. Response originated from "host1.example.net" will be redirected to "host.example.com".
  • B. Request originated from "host1.example.net" will be redirected to "host.example.com".
  • C. Response originated from "host.example.net" will be redirected to "host1.example.com".
  • D. Request originated from "host.example.net" will be redirected to "host1.example.com".

Answer: B

Explanation:
Explanation/Reference:

 

NEW QUESTION 33
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?

  • A. HTTP_ECV on port 99
  • B. HTTP on port 80
  • C. HTTP on port 99
  • D. HTTP-ECV on port 80

Answer: A

 

NEW QUESTION 34
Scenario: A Citrix Administrator gives permissions to team members to access their own admin partition. This will allow them to add resources for different departments and manage them without making changes to the default Citrix ADC partition and configuration.
One team member typing to use the command line interface (CLI) to troubleshoot an authentication issue could NOT use aaad.debug. However, the team member has full permissions on the admin partition.
What can be the cause of this issue?

  • A. The team member is NOT using the CLI correctly.
  • B. The team member needs to troubleshoot the issue from the GUI.
  • C. The team member does NOT have permission to use the CLI.
  • D. The team member does NOT have shell access by design.

Answer: A

 

NEW QUESTION 35
A Citrix Administrator needs to confirm that all client certificates presented to the authentication vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?

  • A. CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2023)
  • B. CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2023)
  • C. CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2023)
  • D. CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2023)

Answer: C

 

NEW QUESTION 36
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current active directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?

  • A. An authentication, authorization, and auditing (AAA) action to the group
  • B. A nested group to the new group
  • C. A command policy to the group
  • D. Users to the group on the Citrix ADC

Answer: C

 

NEW QUESTION 37
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?

  • A. Image shrink-to attributes
  • B. Image lazy loading
  • C. Image optimization
  • D. Domain sharding

Answer: C

Explanation:
Explanation

 

NEW QUESTION 38
Scenario: A Citrix Administrator needs to configure a Responder policy, so that the string "/mytraining" is added to every URL path received.
The administrator should use these commands to accomplish this:
>add responder action Redirect_Act redirect "HTTP.REQ.URL.PATH_AND_QUERY+\"mytraining\"" - responseStatusCode 302
>add responder policy Redirect_Pol___________Redirect_Act
>bind lb vServer lb_vsrv_www -policyName Redirect_Pol -priority 100 -gotoPriorityExpression END - type_______ (Choose the correct option to complete the set of commands.)

  • A. "(HTTP.REQ.URL.STARTSWITH(\"mytraining\"))"
    RESPONSE
  • B. "!(HTTP.REQ.URL.ENDSWITH(\"mytraining\"))"
    REQUEST
  • C. "(HTTP.REQ.URL.STARTSWITH(\"mytraining\"))"
    REQUEST
  • D. "!(HTTP.REQ.URL.ENDSWITH(\"mytraining\"))"
    RESPONSE

Answer: A

 

NEW QUESTION 39
......


For more info visit:

1Y0-241 Exam Reference

 

Valid 1Y0-241 Exam Updates - 2022 Study Guide: https://pass4sure.prep4cram.com/1Y0-241-exam-cram.html