[Oct-2023] OSP-002 Pre-Exam Practice Tests | Exam Questions and Answers for OSP Certification Study Guide
BICSI Outside Plant Designer (OSP) Certification Sample Questions
NEW QUESTION # 84
Loss of a fiber or any fiber in a cable is measured in __________.
- A. dBm
- B. milliwatts
- C. dB
Answer: C
NEW QUESTION # 85
In a multimode optical fiber, light signals travel in the \_\_\_\_\_\_\_\_\_\_\_\_\_ of the fiber.
- A. Both the core and cladding
- B. Jacket
- C. Core
- D. Cladding
Answer: C
NEW QUESTION # 86
10 dB corresponds to a factor of \_\_\_\_\_\_\_\_\_\_ in power.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 87
OTDRs are used in outside plant cables to \_\_\_\_\_\_\_\_\_\_.
- A. Find faults
- B. Verify splice loss
- C. Measure length
- D. All of the above
Answer: D
NEW QUESTION # 88
Which of the following are not necessary in a centralized fiber optic cabling architecture per industry standards?
- A. NIC cards
- B. Telecom closets
- C. Wall outlets
- D. Repeaters or hubs
Answer: B
NEW QUESTION # 89
What do category ratings of UTP cable (e.g. Cat 3, Cat 5e, Cat 6 and Cat 6A) mean?
- A. How well the cables are made
- B. Flame retardance of the cable
- C. How far the cable will work in networks
- D. The performance level of UTP cable
Answer: D
NEW QUESTION # 90
Wavelength division multiplexing uses __________ to transmit multiple signals on a single fiber.
- A. The wide spectral width of lasers
- B. F-P Lasers
- C. The high fiber bandwidth
- D. The ability of fiber to transmit multiple wavelengths without mixing
Answer: D
NEW QUESTION # 91
What test instrument(s) are used for insertion loss testing.
- A. OTDR
- B. OLTS or light source and power meter
- C. VFL
Answer: B
NEW QUESTION # 92
What UTP installation tool is needed for teminating most Cat 5e/6 jacks?
- A. Punchdown tool with 110 blade
- B. Spudger
- C. Punchdown tool with 66 blade
- D. Crimper
Answer: A
NEW QUESTION # 93
Wireless networks are really used to replace ________.
- A. Structured cabling
- B. The patchcord that connects a PC to a wall outlet connection
- C. Backbone cabling
- D. Routers
Answer: B
NEW QUESTION # 94
UTP cable installed above the ceiling can \_\_\_\_\_\_\_\_\_\_ the celing tiles.
- A. be hung from frames of
- B. not be laid on
- C. must be sleeved to be laid on top of
- D. be laid directly on top of
Answer: B
NEW QUESTION # 95
Does a jack have the same color code for the pairs as a punchdown block?
- A. Depends on whether it is T568A, T568B or USOC
- B. No
- C. Depends on the type and manufacturer of the jack
- D. Yes
Answer: B
NEW QUESTION # 96
An older fiber design with a 50/125 micron core is now being used in cabling systems because it___________.
- A. Can be cabled in more compact cable designs
- B. Costs half as much as other multimode fibers
- C. Has a higher bandwidth with laser sources which gives more distance capability with gigabit (and above) networks
- D. Excess supplies are currently available from the far east
Answer: C
NEW QUESTION # 97
Copper networks can be converted to fiber optics using \_\_\_\_\_\_\_\_\_\_.
- A. Media converters
- B. Patch panels
- C. Rewiring
- D. Fiber hubs
Answer: A
NEW QUESTION # 98
Both equpment rooms and telecom rooms should have \_\_\_\_\_\_\_\_\_\_.
- A. Uninterruptible power
- B. Air conditioning
- C. All of the above
- D. Data quality ground
Answer: C
NEW QUESTION # 99
Which network connection type has the highest bandwidth?
- A. Optical fiber
- B. Power line
- C. Wireless
- D. UTP
Answer: A
NEW QUESTION # 100
......
BICSI Exam Practice Test To Gain Brilliante Result: https://pass4sure.prep4cram.com/OSP-002-exam-cram.html
