[Jun 10, 2023] Valid HPE6-A71 Test Answers & HP HPE6-A71 Exam PDF
Realistic HPE6-A71 Exam Dumps with Accurate & Updated Questions
NEW QUESTION # 87
An administrator stages an AP and re-provisions it as a RAP from the Mobility Master (MM). When re-provisioning the RAP, the administrator must enter a user's credentials. What is the purpose of these credentials?
- A. to authenticate users on wired ports
- B. to authenticate users on wireless ports
- C. to authenticate the RAP device
- D. to authenticate users on wired and wireless ports
Answer: C
NEW QUESTION # 88
Refer to the exhibit.
An administrator examines the configuration of an AP from apboot mode shown in theexhibit.
What can the administrator determine from the configuration?
- A. RAP terminated on a Mobility Master.
- B. AP terminated on a non-cluster Mobility Controller.
- C. AP terminated on a Mobility Controller in a cluster.
- D. RAP terminated on a stand-alone controller.
Answer: C
NEW QUESTION # 89
A company opens a new branch office and a RAP is used to connect to a corporate office Aruba Mobility Controller (MC). The company needs to provide connectivity to the office across the street. There is an AP across the street. However, there is no wired connectivity between the buildings.
Which actions can the administrator select to provide the required connectivity? (Choose two.)
- A. Implement one of the APs as a Mesh Point.
- B. Provision all APs at the branch offices as Mesh Portals.
- C. Implement two mesh clusters.
- D. Provision all APs at the branch offices as Mesh Points.
- E. Provision the RAP as a Remote Mesh Portal.
Answer: D,E
Explanation:
Explanation/Reference:
NEW QUESTION # 90
An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should the administrator assign to an administrator who should havethe same privileges as the default admin account?
- A. superuser
- B. root
- C. level-15
- D. admin
Answer: D
NEW QUESTION # 91
Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS.8.x?
- A. RAP
- B. BLE Beacon
- C. Mobility Master
- D. Mesh Point
Answer: C
NEW QUESTION # 92
An administrator wants to temporarily deny login access who fail 802.1x authentication functions three or more times. Which process will the administrator need to configure?
- A. EAP termination
- B. fail through
- C. captive portal
- D. blacklisting
Answer: D
NEW QUESTION # 93
An administrator creates new pre-and post-authentication roles for a new WLAN. For which profile should the administrator assign these new roles under the Managed Network section?
- A. AAA profile
- B. Virtual AP
- C. Server Groups
- D. 802.1X
Answer: A
NEW QUESTION # 94
Refer to the exhibit.
An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?
- A. User load balancing is enabled.
- B. AP load balancing is enabled.
- C. This is an L3-connected cluster.
- D. This is an L2-connected cluster.
Answer: A
NEW QUESTION # 95
Refer to the exhibit.
An administrator sets up a cluster of Aruba MobilityControllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?
- A. User load balancing is enabled.
- B. AP load balancing is enabled.
- C. This is an L3-connected cluster.
- D. This is an L2-connected cluster.
Answer: A
NEW QUESTION # 96
Refer to the exhibit.
What is true about the operation of the Aruba Mobility Controller (MC) shown in the exhibit?
- A. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.
- B. The Mobility master is in disaster recovery mode and will push changes to a Managed Controller.
- C. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
- D. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
Answer: A
NEW QUESTION # 97
An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.
Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?
- A. Backup
- B. Standard
- C. Persistent
- D. Always
Answer: A
Explanation:
Explanation
https://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Content/ArubaFrameStyles/Remote_AP/Ad
NEW QUESTION # 98
An administrator wants to simulate network traffic and analyze results in an Aruba wireless network to test components such as WPA-2, DHCP, and other protocols. Which Aruba solution implements these functions?
- A. AirWave RAPIDS
- B. Clarity Synthetic
- C. AirWave VisualRF
- D. Clarity Live
Answer: B
NEW QUESTION # 99
An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.
Which process should the administrator perform to reset the AP back to its initial default state?
- A. From the AP's ArubaOS CLI, execute write erase all.
- B. From the controller's ArubaOS, execute write erase all.
- C. From apboot mode, execute purgeenv.
- D. From apboot mode, execute factory_reset.
Answer: D
NEW QUESTION # 100
Refer to the exhibit.
Controllers are configured in a cluster as shown in the exhibit. These are the network details.
-A Mobility Master (MM) managers the cluster.
-The cluster contains two controllers: C1 and C2.
-AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
-AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
- B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
- C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
- D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
Answer: B
NEW QUESTION # 101
An administrator supports a network that contains ArubaOS-Switches and Mobility Controllers (MCs).
Restrictive MC firewall policies, control wireless access. The administrator wants to implement a feature to apply the same MC firewall policies to users connected to the Ethernet switch ports.
Which ArubaOS-Switch feature provides this capability?
- A. IPSec site-to-site tunneling
- B. Tunneled node
- C. VSF
- D. Port Security
Answer: D
NEW QUESTION # 102
An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should be assigned to anadministrator who needs to only generate reports and monitor WLANS and ports?
- A. Root
- B. Network-operations
- C. Location-api-management
- D. AP-provisioning
Answer: B
NEW QUESTION # 103
An administrator supports a group of engineers that commonly troubleshoot company problems from any location without wired connectivity. They need secure connectivity to a corporate web-based portal with their Android smartphones. Which solution should the administrator recommend to solve the engineer's connectivity problem?
- A. Deploy VIA clients
- B. Deploy Campus APs with mesh
- C. Deploy site-to-site VPN
- D. Deploy Mobile Device Management
Answer: A
NEW QUESTION # 104
Which protocol is used between Aruba Mobility Controllers (MC) and ArubaOS-Switches to negotiate tunneled node?
- A. GRE
- B. SNMP
- C. PAPI
- D. IPSec
Answer: C
NEW QUESTION # 105
An administrator wants to add a new folder in AirWave. Where would the administrator perform this action?
- A. in Device Setup
- B. in AMP Setup
- C. in Groups
- D. in AP/Devices
Answer: D
NEW QUESTION # 106
......
If you are a wireless networking professional looking to advance your career and demonstrate your expertise in Aruba's products and technologies, the ACMP certification is the perfect opportunity for you. With the HPE6-A71 exam, you can validate your knowledge and skills in designing, implementing, and managing complex wireless networks, and become a globally recognized Aruba Certified Mobility Professional.
The Aruba Certified Mobility Professional certification is highly valued in the industry and is recognized by IT professionals and organizations worldwide. Earning this certification can lead to career advancement opportunities and increased earning potential. Additionally, it can provide IT professionals with the confidence and credibility to take on more challenging wireless networking projects and responsibilities.
The HP HPE6-A71 certification exam is a vendor-specific certification that focuses on Aruba wireless networking solutions. It tests the candidate's ability to implement and manage wireless networks using Aruba technologies. This certification is highly valued in the industry as Aruba is one of the leading providers of wireless networking solutions. It is an excellent choice for IT professionals who are looking to enhance their skills in wireless network management and gain a competitive edge in the job market. By obtaining this certification, candidates can demonstrate their expertise and commitment to their profession, which can lead to better job opportunities and higher salaries.
HPE6-A71 Exam Dumps - PDF Questions and Testing Engine: https://pass4sure.prep4cram.com/HPE6-A71-exam-cram.html
