Authentic 350-501 Dumps - Free PDF Questions to Pass
Guaranteed Accomplishment with Newest Feb-2022 FREE 350-501
Additionally, the students can find some information from different books. As for Cisco 350-501, it is recommended to read the following:
- CCNP Service Provider (SPCOR 350-501) by Saransh Paliwal.
- How I Passed Implementing & Operating Cisco Service Provider Network Core Technologies Exam: Successfully Proven Tips by Rocismo Liolentz Publications;
Moreover, you can take practice tests that are available on the Internet. This tool allows the learners to dive into the atmosphere of a real exam and evaluate their current level of preparedness.
How much Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam Cost
The cost of this exam is USD 300 but prices for Cisco examinations differ according to level and currency. The preparatory material including 350-501 exam dumps and 350-501 practice exams add to the total cost of the exam. Also, exam vouchers can be used for discounts. To find out the cost of your test, click here and choose your country.
Apart from courses, applicants can refer to various books. These are two tested and credible guides to consider using:
- CCNP Service Provider - (SPCOR 350-501) by Saransh Paliwal
This book is available in Kindle format on the Amazon website and it has been prepared by Saransh Paliwal. It observes the Cisco 350-501 exam structure and helps the candidates consolidate their knowledge for each test section such as core architecture, services, networking, automation, security, as well as network assurance. Apart from following the exam blueprint, this edition contains a detailed explanation of all topics related to Cisco Core Technologies. Therefore, this guide becomes a valuable tool that the examinees can use to check their preparedness level and clarify any questions they might have in the process of getting ready for 350-501 exam.
- How I Passed Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR 350-501) Exam: Successfully Proven Tips by Rocismo Liolentz Publications
This book is available on Amazon in Kindle format. The publisher uses verified tips to help the candidates pass the Cisco 350-501 certification exam from the first attempt. The material contains 76 pages of advice and hints on how to successfully ace this test, including a time-management plan, exam design, registration procedure, pitfalls, and much more. Moreover, the author mentions that they collected feedback from thousands of past successful candidates on how they managed to obtain the passing score. Therefore, they used the most useful techniques and included them in this book which can be seen as a valuable guide to become a certified Cisco Specialist on Service Provider Core.
NEW QUESTION 137
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
Explanation
Path Computation Element (Calculates paths through the network, keeps TE topology database information, sends path status updates) Path computation Client (sends path calculation request, sends path creation request) Path Computation Element (PCE) Represents a software module (which can be a component or application) that enables the router to compute paths applying a set of constraints between any pair of nodes within the router's TE topology database. PCEs are discovered through IGP.
Path Computation Client (PCC)
Represents a software module running on a router that is capable of sending and receiving path computation requests and responses to and from PCEs. The PCC is typically an LSR (Label Switching Router).
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r5-3/mpls/configuration/guide/b-mpls-cg53x-crs
NEW QUESTION 138
Which BGP attribute i5 used first when determining the best path?
- A. AS path
- B. weight
- C. origin
- D. local preference
Answer: B
NEW QUESTION 139
Refer to the exhibit:
Which information is provided for traceback analysis when this configuration is applied?
- A. source interface
- B. packet size distribution
- C. BGP version
- D. IP sub flow cache
Answer: C
NEW QUESTION 140
Refer to the exhibit:
A network operator working for service provider with an employee id 3715 15:021 applied this configuration to a router.
Which additional step should the engineer use to enable LDP?
- A. Enable MPLS LDP on the interface
- B. Disable Cisco Express Forwarding globally
- C. Delete the static router ID
- D. Configure the both keyword to enable LDP globally
Answer: A
NEW QUESTION 141
Refer to the exhibit:
If router RA is configured as shown, which IPv4 multicast address space does it use?
- A. 232.0. 0.0/8
- B. 224.0. 0.0/8
- C. 225.0. 0.0/8
- D. 239.0. 0.0/8
Answer: A
NEW QUESTION 142
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.
Answer:
Explanation:
Explanation
Stateful (It has 1: N translation, It uses address overloading, It conservers IPv4 addresses) Stateless (It is limited on the number of endpoints, It mandates IPv4-translatable IPv6 address allocation)
NEW QUESTION 143 
Refer to the exhibit. Which configuration prevents the OSPF neighbor from establishing?
- A. network statement
- B. mtu
- C. duplex
- D. default-metric
Answer: B
Explanation:
Section: Networking
NEW QUESTION 144
An engineer working for a private telecommunication company with an employee id: 3948:11:613 needs to limit the malicious traffic on their network. Which configuration must the engineer use to implement URPF loose mode on the GigabitEthernetO/1 interface?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: D
Explanation:
Explanation
"reachable-via any" must be configured for Loose mode on both IPv4 & IPv6.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/xe-3s/sec-data-urpf-xe-3s-book/s
NEW QUESTION 145 
Refer to the exhibit. You are configuring an administrative domain in the given multi-vendor environment with PIM-SM.
Which feature can you implement so that devices can dynamically learn the RP?
- A. BIDIP-PIM
- B. Auto-RP
- C. SSM
- D. BSR
Answer: B
Explanation:
Section: Services
NEW QUESTION 146 
Refer to the exhibit. What is the URL used for with REST API?
- A. It is used to contact a URL filter to determine the efficacy of a web address.
- B. It is used to send a message to the APIC to perform an operation on a managed object or class operator.
- C. It is used to initiate an FTP session to save a running configuration of a device.
- D. It is used to send a TACACS + authentication request to a server.
Answer: B
Explanation:
Section: Automation and Assurance
NEW QUESTION 147
Refer to the exhibit.
If RC is a stub router, which entry must be injected so that it will send traffic outside the OSPF domain?
- A. more specific route
- B. default route
- C. virtual link between RB and RC
- D. sham link
Answer: A
NEW QUESTION 148
What are two factors to consider when implementing NSR High Availability on an MPLS PE router? (Choose two.)
- A. It requires all PE-CE sessions to support NSR
- B. It operates normally without NSR support on the PE peers.
- C. It cannot sync state information across redundant RPs
- D. It consumes more memory and CPU resources than NSF
- E. It requires routing protocol extensions
Answer: B,D
NEW QUESTION 149
What is the difference between SNMP and model-driven telemetry?
- A. SNMP uses the YANG data modeling language
- B. Telemetry allows for modeled network data to be pushed to the network administrator on an as-needed basis
- C. SNMP pushes network data to the network administrator whenever it is queried
- D. Telemetry uses traps and inform messages to deliver data to a network administrator on a polling basis
Answer: B
NEW QUESTION 150
Refer to the exhibit.
An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.
Answer:
Explanation:
NEW QUESTION 151
Refer to the exhibit.
A network operator working for a telecommunication company with an employee 3994:37:650 is implementing a cisco Unified MPLS solution. What is the effect of this implementation?
- A. IS-IS is deployed between the PEs and ABRs with RFC 3107.
- B. BGP is deployed between the PEs and ABRs with RFC 3107.
- C. OSPF is deployed between the PEs and ABRs with RFC 3107.
- D. EIGRP is deployed between the PEs and ABRs with RFC 3107.
Answer: B
Explanation:
NEW QUESTION 152
Refer to the exhibit:
You are configuring an administrative domain implement so that devices can dynamically learn the RP?
- A. Auto-RP
- B. SSM
- C. BSR
- D. BID1R-PIM
Answer: A
NEW QUESTION 153
Which module refers to the network automation using Ansible?
- A. the losxr_logging module to run debugging for severity levels 2 to 5
- B. the losxr_command module to issue run commands on remote devices
- C. the iosxr_user module to manage banners for users in the local database
- D. the losxr_system module to collect facts from remote devices
Answer: B
Explanation:
Explanation
https://docs.ansible.com/ansible/latest/collections/cisco/iosxr/iosxr_command_module.html#ansible-collections-
NEW QUESTION 154
......
350-501 Braindumps PDF, Cisco 350-501 Exam Cram: https://pass4sure.prep4cram.com/350-501-exam-cram.html
